Tag Archives: coil winding machine

China Hot selling China Factory Industry Coil Winding Wire Guide Textile Machine Ceramic Roller

Product Description

China Factory Industry Coil Winding Wire Xihu (West Lake) Dis. Textile Machine Ceramic Roller
 

The specification

The specification of ceramic roller guides

1. Raw material option: high purity alumina(Al2o3), zirconia(ZrO2), titania(TiO2)
2. Dimensions: min. diameter can be 2mm, max. diameter can be 50mm
3. Type of products: eyelets, bushings, friction discs, pigtails, dog tails, air nozzles, and so on
4. Tolerance: general tolerance ± 1% of the dimensions, or better via a precision process
5. Surface finish: mirror surface, better than Ra0.1 at working contact surface
 

The Prime Characteristics

The main features of ceramic roller guides

1. Exceptional wear resistance and hardness better than metal ones
2. Low yarn tensions without any yarn damage
3. Long service life on both special yarns and raw materials with aggressive additives
4. Highest yarn cleanliness without any fault silk occasion
5. Excellent mechanical strength, fracture toughness, and bending strength
6. Exceptional wear resistance and hardness better than metal ones
7. Good insulation, free of static electricity, resistant magnetic
8. Superb thermal conductivity coefficient and thermal shock property
9. Corrosion resistance in harsh working conditions
10. Excellent thermal shock resistance and good thermal stability
11. Nox-toxic, healthy material, eco-friendly material
12. Meet with RoHS, REACH regulation completely
 

Product Description

The description of ceramic roller guides

Our ceramic wire roll guides are as varied as our pulley, both single or multiple grooves are available, also the dimensions can be customized. These ceramic roller guides are made of 96%, 99%, or 99.5% aluminum oxide ceramics, call it alumina, with CHINAMFG polished running surfaces.

Alumina is a kind of improved technical ceramics, these ceramic yarn rollers promote the winding efficiency a lot in textile machinery because of its low friction, superb wear resistance, anti-static electricity features..

The gallery of ceramic wire guides


Remark:
We have been producing a variety of ceramic wire guide, including ceramic pigtail, ceramic traverse guide,
ceramic roller, ceramic bobbin, and so on.
 

Datasheet of Technical ceramics

Property Units Material
 
99.5%
alumina
99%
alumina
95%
alumina
ZrO2
(Y-TZP)

ZrO2
(TTZ)

Density g/cm3 ≥3.85 ≥3.80 ≥3.60 ≥5.95 ≥5.72
Water absorption % 0 0 0 0 0
Hardness HV 1700 1700 1500 1300 900
Flexural strength Mpa ≥379 ≥338 ≥320 ≥1200 ≥1200
Compressive strength Mpa ≥2240 ≥2240 ≥2000 ≥1990 1750
Fracture toughness Mpa m1/2 4-5 4-5 3-4 6.5-8 11
Max. service
temperature
ºC 1675 1600 1450 1000  
CTE 1×10 -6 /ºC 6.5~8.0 6.2~8.0 5.0~8.0 8.0~9.5 10.2
Thermal shock T(ºC) ≥250 ≥200 ≥220 ≥300 350
Thermal conductivity(25ºC) W/m.k 30 29 24 3 3
Volume resistivity ohm.cm          
25ºC >1 x 10 14 >1 x 10 14 >1 x 10 14 >1 x 10 11 >1 x 10 11
300ºC 1 x 10 12 8 x 10 11 10 12 -10 13 1 x 10 10 1 x 10 10
500ºC 5 x 10 10 2 x 10 9 1 x 10 9 1 x 10 6 1 x 10 6
Insulation strength KV/mm 19 18 18 17 20
Dielectric constant(1Mhz) (E) 9.7 9.5 9.5 29 28

 

Manufacturing flow chart of advanced ceramic eyelet

We have in-housing comprehensive manufacturing types of equipment, including forming, sintering,
CNC machining, precision grinding, laser cutting, and so on, it helps us to control the quality very well.
Also, it greatly benefits cost control.

 

FAQ

Q1. Are you a factory or trading company?
A: We are a manufacturer with over 15 years of experience. You are welcome to visit our factory.

Q2: Do you send a sample to check?
A: Sure, the sample is free and freight collect.

Q3: When will you ship it?
A: If the products are in storage, we’ll ship within 48 hours

Q4: When can I get the price?
A: We regularly quote within 24 hours after we get your inquiry. If you are in urgent need of getting the price.
Please call us or tell us in your email so that we will proceed with your inquiry as a priority.

Q5: Is it available to provide customized products?
A: We always support custom-made demand as per different materials, dimensions, and designs.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Warranty: 1 Year
Classification: Threaded Parts
Processing Type: Metal Processing
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

guide roller

What advantages do guide rollers offer compared to other conveyor system components?

Guide rollers offer several advantages compared to other conveyor system components. Here’s a detailed explanation of the advantages of guide rollers:

  • Precise and Controlled Motion:

Guide rollers play a key role in achieving precise and controlled motion in conveyor systems. They provide continuous guidance and alignment for the materials or objects being transported, ensuring smooth and accurate movement along the desired path. Guide rollers help prevent lateral movement, misalignment, and deviations, resulting in precise positioning and controlled motion throughout the conveyor system.

  • Enhanced Stability:

Guide rollers contribute to enhanced stability in conveyor systems. By distributing the load evenly across multiple rollers, they help maintain balance and prevent excessive stress on any individual component. This load distribution minimizes the risk of roller damage, wear, or failure, resulting in a stable and reliable conveyor operation. The enhanced stability provided by guide rollers reduces the chances of material spillage, wobbling, or tilting, ensuring safe and efficient material handling.

  • Reduced Friction and Energy Consumption:

Guide rollers are designed to minimize friction and energy consumption in conveyor systems. The smooth surface configuration of guide rollers, often with low-friction characteristics, allows materials or objects to move with minimal resistance. This reduced friction not only results in smoother motion and improved efficiency but also helps decrease the energy required to drive the conveyor system. By reducing friction and energy consumption, guide rollers contribute to cost savings and environmental sustainability.

  • Flexibility and Adaptability:

Guide rollers offer flexibility and adaptability in conveyor systems. They can be easily integrated into various conveyor configurations and are compatible with different types of materials and objects. Guide rollers can be customized in terms of dimensions, materials, flange configurations, and mounting options to meet specific industry or application requirements. This flexibility allows for seamless integration and adaptability to different conveyor system designs, making guide rollers a versatile choice for material handling.

  • Ease of Maintenance:

Guide rollers are generally easy to maintain in conveyor systems. They typically have accessible areas for lubrication and cleaning, facilitating routine maintenance tasks. Guide rollers can be designed with features such as removable shafts or easy-to-replace components, simplifying maintenance and minimizing downtime. The ease of maintenance associated with guide rollers helps improve overall system uptime, extend component lifespan, and reduce maintenance costs.

  • Cost-Effectiveness:

Guide rollers offer a cost-effective solution for conveyor systems. Compared to other conveyor components, such as complex guiding systems or automated tracking mechanisms, guide rollers are relatively simple in design and construction. They are typically more affordable and easier to install and maintain. The cost-effectiveness of guide rollers makes them a practical choice for a wide range of industries and applications, without compromising performance or reliability.

Overall, guide rollers provide advantages such as precise and controlled motion, enhanced stability, reduced friction and energy consumption, flexibility and adaptability, ease of maintenance, and cost-effectiveness. These advantages make guide rollers a preferred choice for achieving efficient and reliable material handling in conveyor systems.

guide roller

Can you provide insights into the importance of proper installation and alignment of guide rollers?

Proper installation and alignment of guide rollers are crucial for ensuring optimal performance, longevity, and safety in material handling systems. Here are some insights into their importance:

  • Accurate Material Guidance:

Proper installation and alignment of guide rollers ensure accurate material guidance along the desired path. When guide rollers are correctly installed and aligned, they create a well-defined trajectory for the materials to follow, preventing material deviation, misalignment, or collisions. Accurate material guidance is essential for maintaining process efficiency, preventing disruptions, and avoiding damage to both the materials being handled and the equipment itself.

  • Reduced Wear and Damage:

Correctly installed and aligned guide rollers minimize wear and damage to both the guide rollers and the materials being conveyed. Misalignment or improper installation can result in excessive friction, uneven loading, or unnecessary stress on the guide rollers. This can lead to premature wear, deformation, or failure of the rollers, as well as damage or degradation of the conveyed materials. Proper alignment ensures even distribution of forces and reduces the risk of wear, extending the service life of the guide rollers and preserving the integrity of the materials.

  • Optimized Energy Efficiency:

Properly installed and aligned guide rollers contribute to optimized energy efficiency in material handling systems. Misalignment or improper installation can create additional friction, requiring more power to move the materials along the desired path. This results in increased energy consumption and higher operational costs. On the other hand, accurate alignment reduces friction, minimizes energy losses, and improves overall energy efficiency. By ensuring proper installation and alignment, material handling systems can operate more efficiently and cost-effectively.

  • Prevention of Material Jams and Blockages:

Guide rollers that are installed and aligned correctly help prevent material jams and blockages within the system. Misalignment or improper installation can cause materials to deviate from the intended path, leading to obstructions or accumulation in critical areas. These blockages can disrupt the material flow, impair system performance, and potentially damage the equipment. Proper alignment and installation of guide rollers ensure smooth and unobstructed material movement, minimizing the risk of jams and blockages and maintaining uninterrupted operation.

  • Enhanced System Stability and Safety:

Proper installation and alignment of guide rollers contribute to system stability and safety. Misaligned or improperly installed guide rollers can introduce instability, vibrations, or wobbling during material handling operations. This instability not only affects the accuracy and efficiency of material movement but also poses safety risks for personnel and equipment. Accurate alignment ensures stable and controlled material conveyance, reducing the likelihood of accidents, collisions, or equipment damage. It promotes a safer working environment and protects the integrity of the material handling system.

In summary, proper installation and alignment of guide rollers are vital for accurate material guidance, reducing wear and damage, optimizing energy efficiency, preventing material jams, enhancing system stability, and ensuring safety in material handling operations. By paying close attention to the installation and alignment processes, operators can maximize the performance, reliability, and lifespan of guide rollers while minimizing the risk of disruptions and costly repairs.

guide roller

What is a guide roller, and how is it used in various industrial applications?

A guide roller is a mechanical component used in various industrial applications to guide and support the movement of objects along a predetermined path. Here’s a detailed explanation of what a guide roller is and how it is used in different industrial applications:

  • Definition and Construction:

A guide roller, also known as a tracking roller or conveyor roller, is a cylindrical or barrel-shaped component typically made of metal or durable plastic. It is designed with a central axle and bearings that allow it to rotate freely. The outer surface of the guide roller is usually smooth or equipped with grooves or flanges to ensure proper alignment and guidance of the moving object.

  • Industrial Applications:

Guide rollers find application in a wide range of industrial sectors, including manufacturing, material handling, transportation, and logistics. Some common industrial applications include:

  • Conveyor Systems:

Guide rollers are extensively used in conveyor systems to support and guide the movement of conveyor belts or other types of conveyance surfaces. They help maintain proper alignment and prevent the belt from wandering or slipping off the designated path. Guide rollers are strategically positioned along the conveyor to ensure smooth and efficient material handling, reducing the risk of jams, spills, or product damage.

  • Packaging Machinery:

In packaging machinery, guide rollers assist in the precise movement and positioning of packaging materials, such as boxes, cartons, or bags. They ensure smooth transitions and accurate alignment during processes such as filling, sealing, labeling, and palletizing. Guide rollers play a crucial role in maintaining the overall efficiency and reliability of packaging operations.

  • Printing and Paper Handling:

Guide rollers are used in printing and paper handling equipment to guide paper or other printable media through the printing or processing stages. They help prevent paper misalignment, wrinkling, or skewing, ensuring accurate registration and consistent print quality. Guide rollers are also employed in paper cutting, folding, and binding machines to ensure precise paper movement and reliable operation.

  • Textile Machinery:

In textile manufacturing, guide rollers are utilized in various machinery, such as spinning frames, weaving looms, and fabric finishing equipment. They guide yarns, threads, or fabrics through different stages of production, ensuring proper tension and alignment. Guide rollers contribute to the overall quality and efficiency of textile processes, minimizing defects and improving productivity.

  • Material Handling Equipment:

Guide rollers are integral components in material handling equipment, such as lift trucks, pallet jacks, and automated guided vehicles (AGVs). They facilitate the smooth movement of loads and assist in accurate positioning and maneuvering. Guide rollers are often used in conjunction with tracks or rails to ensure stable and controlled movement in various industrial environments.

In conclusion, a guide roller is a mechanical component used to guide and support the movement of objects along a predetermined path in various industrial applications. They play a critical role in maintaining proper alignment, preventing misalignment or slippage, and ensuring smooth and efficient operation. Whether it’s in conveyor systems, packaging machinery, printing equipment, textile machinery, or material handling applications, guide rollers contribute to the overall performance, reliability, and productivity of industrial processes.

China Hot selling China Factory Industry Coil Winding Wire Guide Textile Machine Ceramic Roller  China Hot selling China Factory Industry Coil Winding Wire Guide Textile Machine Ceramic Roller
editor by CX 2024-03-15

China Good quality China Factory Industry Coil Winding Wire Guide Textile Machine Ceramic Roller

Product Description

China Factory Industry Coil Winding Wire Xihu (West Lake) Dis. Textile Machine Ceramic Roller
 

The specification

The specification of ceramic roller guides

1. Raw material option: high purity alumina(Al2o3), zirconia(ZrO2), titania(TiO2)
2. Dimensions: min. diameter can be 2mm, max. diameter can be 50mm
3. Type of products: eyelets, bushings, friction discs, pigtails, dog tails, air nozzles, and so on
4. Tolerance: general tolerance ± 1% of the dimensions, or better via a precision process
5. Surface finish: mirror surface, better than Ra0.1 at working contact surface
 

The Prime Characteristics

The main features of ceramic roller guides

1. Exceptional wear resistance and hardness better than metal ones
2. Low yarn tensions without any yarn damage
3. Long service life on both special yarns and raw materials with aggressive additives
4. Highest yarn cleanliness without any fault silk occasion
5. Excellent mechanical strength, fracture toughness, and bending strength
6. Exceptional wear resistance and hardness better than metal ones
7. Good insulation, free of static electricity, resistant magnetic
8. Superb thermal conductivity coefficient and thermal shock property
9. Corrosion resistance in harsh working conditions
10. Excellent thermal shock resistance and good thermal stability
11. Nox-toxic, healthy material, eco-friendly material
12. Meet with RoHS, REACH regulation completely
 

Product Description

The description of ceramic roller guides

Our ceramic wire roll guides are as varied as our pulley, both single or multiple grooves are available, also the dimensions can be customized. These ceramic roller guides are made of 96%, 99%, or 99.5% aluminum oxide ceramics, call it alumina, with CHINAMFG polished running surfaces.

Alumina is a kind of improved technical ceramics, these ceramic yarn rollers promote the winding efficiency a lot in textile machinery because of its low friction, superb wear resistance, anti-static electricity features..

The gallery of ceramic wire guides


Remark:
We have been producing a variety of ceramic wire guide, including ceramic pigtail, ceramic traverse guide,
ceramic roller, ceramic bobbin, and so on.
 

Datasheet of Technical ceramics

Property Units Material
 
99.5%
alumina
99%
alumina
95%
alumina
ZrO2
(Y-TZP)

ZrO2
(TTZ)

Density g/cm3 ≥3.85 ≥3.80 ≥3.60 ≥5.95 ≥5.72
Water absorption % 0 0 0 0 0
Hardness HV 1700 1700 1500 1300 900
Flexural strength Mpa ≥379 ≥338 ≥320 ≥1200 ≥1200
Compressive strength Mpa ≥2240 ≥2240 ≥2000 ≥1990 1750
Fracture toughness Mpa m1/2 4-5 4-5 3-4 6.5-8 11
Max. service
temperature
ºC 1675 1600 1450 1000  
CTE 1×10 -6 /ºC 6.5~8.0 6.2~8.0 5.0~8.0 8.0~9.5 10.2
Thermal shock T(ºC) ≥250 ≥200 ≥220 ≥300 350
Thermal conductivity(25ºC) W/m.k 30 29 24 3 3
Volume resistivity ohm.cm          
25ºC >1 x 10 14 >1 x 10 14 >1 x 10 14 >1 x 10 11 >1 x 10 11
300ºC 1 x 10 12 8 x 10 11 10 12 -10 13 1 x 10 10 1 x 10 10
500ºC 5 x 10 10 2 x 10 9 1 x 10 9 1 x 10 6 1 x 10 6
Insulation strength KV/mm 19 18 18 17 20
Dielectric constant(1Mhz) (E) 9.7 9.5 9.5 29 28

 

Manufacturing flow chart of advanced ceramic eyelet

We have in-housing comprehensive manufacturing types of equipment, including forming, sintering,
CNC machining, precision grinding, laser cutting, and so on, it helps us to control the quality very well.
Also, it greatly benefits cost control.

 

FAQ

Q1. Are you a factory or trading company?
A: We are a manufacturer with over 15 years of experience. You are welcome to visit our factory.

Q2: Do you send a sample to check?
A: Sure, the sample is free and freight collect.

Q3: When will you ship it?
A: If the products are in storage, we’ll ship within 48 hours

Q4: When can I get the price?
A: We regularly quote within 24 hours after we get your inquiry. If you are in urgent need of getting the price.
Please call us or tell us in your email so that we will proceed with your inquiry as a priority.

Q5: Is it available to provide customized products?
A: We always support custom-made demand as per different materials, dimensions, and designs.

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Warranty: 1 Year
Classification: Threaded Parts
Processing Type: Metal Processing
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

guide roller

What advantages do guide rollers offer compared to other conveyor system components?

Guide rollers offer several advantages compared to other conveyor system components. Here’s a detailed explanation of the advantages of guide rollers:

  • Precise and Controlled Motion:

Guide rollers play a key role in achieving precise and controlled motion in conveyor systems. They provide continuous guidance and alignment for the materials or objects being transported, ensuring smooth and accurate movement along the desired path. Guide rollers help prevent lateral movement, misalignment, and deviations, resulting in precise positioning and controlled motion throughout the conveyor system.

  • Enhanced Stability:

Guide rollers contribute to enhanced stability in conveyor systems. By distributing the load evenly across multiple rollers, they help maintain balance and prevent excessive stress on any individual component. This load distribution minimizes the risk of roller damage, wear, or failure, resulting in a stable and reliable conveyor operation. The enhanced stability provided by guide rollers reduces the chances of material spillage, wobbling, or tilting, ensuring safe and efficient material handling.

  • Reduced Friction and Energy Consumption:

Guide rollers are designed to minimize friction and energy consumption in conveyor systems. The smooth surface configuration of guide rollers, often with low-friction characteristics, allows materials or objects to move with minimal resistance. This reduced friction not only results in smoother motion and improved efficiency but also helps decrease the energy required to drive the conveyor system. By reducing friction and energy consumption, guide rollers contribute to cost savings and environmental sustainability.

  • Flexibility and Adaptability:

Guide rollers offer flexibility and adaptability in conveyor systems. They can be easily integrated into various conveyor configurations and are compatible with different types of materials and objects. Guide rollers can be customized in terms of dimensions, materials, flange configurations, and mounting options to meet specific industry or application requirements. This flexibility allows for seamless integration and adaptability to different conveyor system designs, making guide rollers a versatile choice for material handling.

  • Ease of Maintenance:

Guide rollers are generally easy to maintain in conveyor systems. They typically have accessible areas for lubrication and cleaning, facilitating routine maintenance tasks. Guide rollers can be designed with features such as removable shafts or easy-to-replace components, simplifying maintenance and minimizing downtime. The ease of maintenance associated with guide rollers helps improve overall system uptime, extend component lifespan, and reduce maintenance costs.

  • Cost-Effectiveness:

Guide rollers offer a cost-effective solution for conveyor systems. Compared to other conveyor components, such as complex guiding systems or automated tracking mechanisms, guide rollers are relatively simple in design and construction. They are typically more affordable and easier to install and maintain. The cost-effectiveness of guide rollers makes them a practical choice for a wide range of industries and applications, without compromising performance or reliability.

Overall, guide rollers provide advantages such as precise and controlled motion, enhanced stability, reduced friction and energy consumption, flexibility and adaptability, ease of maintenance, and cost-effectiveness. These advantages make guide rollers a preferred choice for achieving efficient and reliable material handling in conveyor systems.

guide roller

Are there innovations or advancements in guide roller technology that have emerged recently?

Yes, there have been several recent innovations and advancements in guide roller technology. Here are some notable developments:

  • High-Performance Materials:

Recent advancements in materials science have led to the development of high-performance materials for guide rollers. These materials offer improved strength, durability, and wear resistance, allowing guide rollers to withstand heavy loads and harsh operating conditions. For example, composite materials combining polymers and fibers offer excellent mechanical properties while being lightweight. Additionally, advancements in surface coatings, such as ceramic or diamond-like carbon (DLC) coatings, provide enhanced friction reduction, corrosion resistance, and longevity.

  • Precision Design and Manufacturing:

Guide rollers are now being designed and manufactured with a greater emphasis on precision. Advanced manufacturing techniques, such as computer numerical control (CNC) machining and 3D printing, enable the production of guide rollers with complex geometries, tight tolerances, and optimized performance characteristics. This precision design and manufacturing result in guide rollers that offer improved alignment, reduced vibration, and enhanced overall performance.

  • Integrated Sensors and Monitoring:

Advancements in sensor technology have made it possible to integrate sensors directly into guide rollers. These sensors can monitor various parameters such as temperature, vibration, or load, providing real-time feedback on the condition and performance of the guide rollers. This data can be used for predictive maintenance, allowing for proactive identification of potential issues and timely intervention to prevent failures or downtime. Integrated sensors and monitoring systems contribute to improved reliability, efficiency, and maintenance practices in material handling systems.

  • Smart Guide Rollers:

Smart guide rollers leverage emerging technologies, such as Internet of Things (IoT) and artificial intelligence (AI), to enhance their functionality and performance. These guide rollers can communicate with other components or systems within the material handling setup, enabling real-time optimization, automation, and control. For example, smart guide rollers can adjust their position or speed dynamically based on the specific material being handled or the desired process parameters. This adaptability and intelligence lead to improved efficiency, flexibility, and responsiveness in material handling operations.

  • Energy Efficiency:

In response to the growing emphasis on sustainability and energy conservation, guide roller technology has seen advancements aimed at improving energy efficiency. This includes the development of low-friction materials, optimized roller designs, and innovative bearing systems that minimize power consumption and reduce frictional losses. By reducing energy requirements, these advancements contribute to lower operational costs and a reduced environmental footprint.

In summary, recent innovations and advancements in guide roller technology encompass high-performance materials, precision design and manufacturing, integrated sensors and monitoring, smart capabilities, and energy efficiency. These advancements enhance the durability, performance, reliability, and sustainability of guide rollers, making them more effective and versatile in a wide range of material handling applications.

guide roller

What is a guide roller, and how is it used in various industrial applications?

A guide roller is a mechanical component used in various industrial applications to guide and support the movement of objects along a predetermined path. Here’s a detailed explanation of what a guide roller is and how it is used in different industrial applications:

  • Definition and Construction:

A guide roller, also known as a tracking roller or conveyor roller, is a cylindrical or barrel-shaped component typically made of metal or durable plastic. It is designed with a central axle and bearings that allow it to rotate freely. The outer surface of the guide roller is usually smooth or equipped with grooves or flanges to ensure proper alignment and guidance of the moving object.

  • Industrial Applications:

Guide rollers find application in a wide range of industrial sectors, including manufacturing, material handling, transportation, and logistics. Some common industrial applications include:

  • Conveyor Systems:

Guide rollers are extensively used in conveyor systems to support and guide the movement of conveyor belts or other types of conveyance surfaces. They help maintain proper alignment and prevent the belt from wandering or slipping off the designated path. Guide rollers are strategically positioned along the conveyor to ensure smooth and efficient material handling, reducing the risk of jams, spills, or product damage.

  • Packaging Machinery:

In packaging machinery, guide rollers assist in the precise movement and positioning of packaging materials, such as boxes, cartons, or bags. They ensure smooth transitions and accurate alignment during processes such as filling, sealing, labeling, and palletizing. Guide rollers play a crucial role in maintaining the overall efficiency and reliability of packaging operations.

  • Printing and Paper Handling:

Guide rollers are used in printing and paper handling equipment to guide paper or other printable media through the printing or processing stages. They help prevent paper misalignment, wrinkling, or skewing, ensuring accurate registration and consistent print quality. Guide rollers are also employed in paper cutting, folding, and binding machines to ensure precise paper movement and reliable operation.

  • Textile Machinery:

In textile manufacturing, guide rollers are utilized in various machinery, such as spinning frames, weaving looms, and fabric finishing equipment. They guide yarns, threads, or fabrics through different stages of production, ensuring proper tension and alignment. Guide rollers contribute to the overall quality and efficiency of textile processes, minimizing defects and improving productivity.

  • Material Handling Equipment:

Guide rollers are integral components in material handling equipment, such as lift trucks, pallet jacks, and automated guided vehicles (AGVs). They facilitate the smooth movement of loads and assist in accurate positioning and maneuvering. Guide rollers are often used in conjunction with tracks or rails to ensure stable and controlled movement in various industrial environments.

In conclusion, a guide roller is a mechanical component used to guide and support the movement of objects along a predetermined path in various industrial applications. They play a critical role in maintaining proper alignment, preventing misalignment or slippage, and ensuring smooth and efficient operation. Whether it’s in conveyor systems, packaging machinery, printing equipment, textile machinery, or material handling applications, guide rollers contribute to the overall performance, reliability, and productivity of industrial processes.

China Good quality China Factory Industry Coil Winding Wire Guide Textile Machine Ceramic Roller  China Good quality China Factory Industry Coil Winding Wire Guide Textile Machine Ceramic Roller
editor by CX 2023-12-19

China best Coil Winding Machine Spare Parts High Polish Textile Ceramic Wire CZPT Pulley Ceramic Roller near me supplier

Product Description

Product Description of Coil Winding Machine Spare Parts High Polish Textile Ceramic Wire Xihu (West Lake) Dis. Pulley Ceramic Roller 
Ceramic Coating aluminum pulley
Detailed Product Description:
1. Aluminium body, surface with chrome ceramic coating
2. High hardness
3. Excellent wear resistance
4. Long service life

Wire drawing pulley, wire drawing capstans
Specially formulated
For wire drawing applications.
Excellent corrosion resistance
Hardness
Specially formulated, zirconia ceramic is the most man-made material for wear applications such as wire drawing capstans.
Corrosion Resistance
Specially formulated, zirconia ceramic is highly resistance to attack by corrosion problems(chemical contents used in processing of wire drawing).
The corrosion resistance fo zirconia ceramic is far superior to metal.
Surface Finish
The superior surface by high polish processing result in high quality of the drawn wire plus extended die life.
Originality
Providing excellent hardness, corrosion resistance, superior surface finish, ceramic capstans attained worldwide estimation in wire drawing industries field.

Place of Origin: Xihu (West Lake) Dis. CZPT China
Material: S45C steel with 99% Chrome oxide rod
Hardness HCR80
Thickness of ultratek base/bond coat 0.10mm
Thickness of Chrome Oxide 0.40mm
adhesive force between coating and body 40mpa
Method of coating Plasma coating (Rod spraying gun)
Application X-Tension machine
Use for Copper wire, Stainless wire and coated wire
Minimum Order Quantity: 5 Pcs
Packaging Details: Carton with foam
Delivery Time: 7-10 days
Payment Terms: T/T, Western Union, Money  Gram, Paypal
Supply Ability: 50,000 pcs per month

Specification of Coil Winding Machine Spare Parts High Polish Textile Ceramic Wire Xihu (West Lake) Dis. Pulley Ceramic Roller  

If you have speicial request, welcome to sent us message to us!

Other prodcuts 

Company Info

Our main products are copper coil, nozzle, ceramic roller, jump wire preventer, various sizes of 
ceramic eyelets, combination  wire roller, ceramic wheel and non-standard parts, all kinds of tension and so on. 

Contact us 

 

How to Fix a Faulty Drive Belt Tensioner

If you’re experiencing grinding, squeaking, or other unusual sounds from your car, your drive belt tensioner may be the culprit. In this article, we’ll discuss why a failed drive belt tensioner may need to be replaced and how to fix it. Once you have determined that your belt tensioner is faulty, you can use a Wrench to remove it and replace it with a new one. After you replace the belt tensioner, it will no longer be making noises.
belt

Problems with timing belt tensioner

Whenever your engine is making strange noises, it is likely that the timing belt tensioner is causing the problem. A bad timing belt tensioner is a big cause of such sounds, as the timing of the engine is critical. When the belt is moving properly, the camshaft and crankshaft are perfectly synchronized, and the valves work in perfect sync during the intake and exhaust strokes of each cylinder.
Other signs of a worn tensioner include rust bleeding and dripping. Usually, rust will appear at the mounting bolts and “stops” on the tensioner. Other symptoms of a worn timing belt tensioner are noise, resistance, and roughness. If any of these symptoms are present, it’s important to get the car fixed as soon as possible. Troubleshooting problems with timing belt tensioner is an easy process if you know the symptoms.
If your car starts making squeaking or grinding noises when you drive, it’s probably the timing belt tensioner. The timing belt can also cause problems with your engine’s valves. When the timing belt is too loose, the valves cannot fully combust the fuel-air mixture. If this problem is left undiagnosed, it could result in severe engine damage. To solve the problem, you must replace the timing belt tensioner.
The repair of the timing belt tensioner is not a difficult job if you’re experienced and comfortable with DIY car repairs. If you have a good knowledge of car repair, you can try to replace it yourself – but don’t forget that it is a complex repair job that requires a lot of skill. So, it’s best to hire a professional mechanic. And if you don’t have the necessary tools and training, you can always try the DIY method.
Other symptoms of a bad timing belt tensioner include an abnormal chirping noise, misfiring, and check engine light malfunction. If you notice any of these symptoms, you should replace the timing belt tensioner as soon as possible. Often, the belt is wearing out and can’t spin freely. You may have to replace the timing belt tensioner to avoid major damage to your engine. The best way to tell if the timing belt tensioner is failing is to check it regularly.

Cost of a new drive belt tensioner

A new drive belt can be expensive. Replacing 1 is usually a straightforward task that requires little knowledge, but some cars are more difficult than others. Replacing a drive belt by yourself may result in the replacement of parts you do not know. You may also encounter problems that cannot be resolved unless you have a mechanic check all the affected parts. You can save money by taking the car to a mechanic before trying to fix the problem yourself.
A drive belt tensioner should last at least 125,000 miles, but can break sooner. Most car mechanics will replace the tensioner after you notice the belt is slipping. It takes about 15 minutes to an hour to replace 1 of these parts, and you can do it yourself with the proper tools. You can also ask about the replacement of pulleys or sprockets. The price of a new drive belt tensioner depends on the make and model of your car.
The average cost to replace a drive belt tensioner is between $235 and $267. This cost includes labor and parts, but doesn’t include taxes or fees. Some vehicles may need related repairs as well, such as serpentine belts or tensioner housing. For a detailed estimate, use the RepairPal Fair Price Estimator. You can compare labor costs and shop for the best price. There are many options available online, and you can choose the most convenient 1 for your needs.
In addition to replacing the drive belt, you should also check the idler pulleys, which do not drive anything. If they have excessive movement, replace them. A failed drive belt tensioner can cause the belt to slip and affect other components of the car. You may also notice warning lights that indicate a problem with the alternator, water pump, or power steering. You should also check your vehicle’s air conditioning.
Replacing the tensioner pulley can be done yourself for about $50. Depending on the type of pulley and belt, you may need to replace other parts of the engine as well. You can save money by replacing a tensioner pulley yourself if you have the time and skills. It’s easy to replace a new drive belt tensioner if you’re a mechanically inclined individual.
belt

Repair options for a failed drive belt tensioner

A failed drive belt tensioner may have several symptoms. For instance, it can make a grinding or squealing sound, and it may emit a burning smell. The battery light on your car may also stay on. These are all signs that your drive belt has failed. However, these symptoms are not always indicative of the failure of the drive belt tensioner. Listed below are some common problems that can be caused by a failed drive belt tensioner.
To check for a failed drive belt tensioner, turn off the engine and examine the arm. If it doesn’t move, it’s time to replace the drive belt. A manual drive belt tensioner is easy to replace. A hydraulic or bad spring drive belt tensioner, however, will not be able to be fixed. If you can’t find a repair shop in your area, visit 1 of NAPA AutoCare locations, or a NAPA online store. They will be able to diagnose the failure and provide solutions for your car.
A spring tensioner is a type of drive belt tensioner that uses a spring-loaded pulley to apply the proper tension to the drive belt. However, spring tensioners can fail and seize if not properly maintained. A hydraulic tensioner uses hydraulic oil under pressure and can malfunction. In some cases, the tensioner can leak oil or lose its ability to tension the drive belt. It can also be damaged by excessive wear, which will cause the belt to break.
A failed drive belt tensioner can affect your car’s performance and functionality. In addition to making your car squeaky and jerky, a failed drive belt tensioner can cause the serpentine or v-belt to slip and wear out prematurely. Repairing a failed drive belt tensioner can also prevent your car from experiencing the same problems in the future. So, what do you do if you find your drive belt is slipping?
If your drive belt tensioner isn’t the problem, you’ll have to replace it. In some cases, a loose tensioner arm can lead to cracks in the tensioner housing. In the worst case scenario, the damaged tensioner can also lead to an overheated engine. Ultimately, a failed drive belt tensioner can cause your car to experience overheating, weak battery charging, and even a weakened power steering system.
belt

Maintenance requirements for a drive belt tensioner

Drive belt tensioner maintenance begins with proper alignment of the pulleys. Misaligned pulleys or drives can wear a belt out too fast. Misalignment can occur if the component was recently replaced. A set of shims can restore the pulleys to the proper alignment. It is important to regularly check the tensioner to ensure proper function. Also, check the belt for cracks or wear.
Before performing any maintenance work, always turn off the drive to protect the motor. The belt should be in a safe position so that it will not fall on the workers. Lock down any moving parts and ensure the fans do not freewheel. When inspecting the drive belt tensioner, examine the belt guard for wear and debris. If the belt is damaged or has excessive heat, it is necessary to clean it or replace it.
It is important to maintain a proper fit between the belt and the drive belt tensioner. An incorrectly-sized drive belt will be difficult to install and adjust. An incorrect-rib count drive belt will fit, but will not last as long. Likewise, drive belts with too many ribs will not last as long. For these reasons, drive belt tensioners should be replaced when they are over 50,000 miles.
A drive belt tensioner is a pulley that rides on the outside surface of the serpentine belt. Its purpose is to maintain constant pressure on the pulleys that power car components. It is typically mounted on the front of the engine, bolted to the crankshaft, and rests against the serpentine belt. If the drive belt is cracked, it needs to be replaced immediately. If the arm is loose or bent, the bearings in the tensioner are probably worn.
The drive belt tensioner is an important part of the drive system, which is essential for smooth operation of the vehicle. However, it does wear out prematurely and should be replaced at a certain mileage. It should also be inspected for normal wear and tear as a result of road dirt, excessive heat, and oil leaks. However, it is important to remember that drive belts are highly sensitive to excessive heat, road dirt, and oil leaks.

China best Coil Winding Machine Spare Parts High Polish Textile Ceramic Wire CZPT Pulley Ceramic Roller     near me supplier China best Coil Winding Machine Spare Parts High Polish Textile Ceramic Wire CZPT Pulley Ceramic Roller     near me supplier

China OEM China Manufacture Hot Selling Textile Spare Part Coil Winding Machine Ceramic CZPT Roller with Great quality

Product Description

China Manufacture Hot Selling Textile Spare Part  Coil Winding Machine Ceramic Xihu (West Lake) Dis. Roller

Product Description

Hardware Auto Spare Part Bearing Coil winding Plastic Ceramic Wire Xihu (West Lake) Dis. Pulley for cable 

Features :

1.The middle ceramic coil is made of precise ceramic and matched with high-speed bearing 2. The winding tension can be maintained in a stable manner through the pulleys .

3.Baffles in both sides can prevent the wire to jump out of the groove .

4.The groove is polished to Ra0.2 .

Advantages :

1.Easy to be installed
2.Low coefficient of frictio
3. High speed running bearing
4.High quality and competitive prices

Specifications of wire CZPT pulley ( ± 0.5mm)

Model A B C D E
HT1001 20 15 3 4.8 3
HT1002 28.7 20 4/5 6.4 4
HT1003 30.4 15 3 10 3
HT1004 40 20 4/5 15 3
HT1005 45 30 5/6 10 6
HT1006 60 40 8/10 13 7
HT1007 60 40 6/8 18 6
HT1008 79.2 50 10 15 9
HT1009 80.5 40 8 25 7
HT1571 100 50 10 29.5 9

 

Company profile 

HARTAI TECHNOLOGYLIMITED was founded in 2001, the factory is located in HangZhou city. ZheJiang province.

We specialized in the manufacture and RD of the component which is used in coil of wire and tension systems. textile machinery and electrical industry precision ceramics. Such as: coil winding nozzle, coil winding tensioner, tension meter, ceramic eyelets, ceramic coating pulley. etc.

We produce high quality coil winding nozzle which include tungsten carbide nozzle, ruby nozzle and ceramic nozzle. We adopt the excellent raw material and technology to ensure best quality which exceed our customer’s expection. Our main customer Mitsubishi, ABB, SVM, YKK. etc, We expect long term relationship with you! 

 

FAQ

1. How can I get a quotation?
 
You can find our contact information below this page and some detail information will be very helpful to get an exact quotation. We will give quotation within 24hours, if urgent, please tell us and we will regard your inquiry priority.
 
2. How can I get a sample?
 
As the price confirmed, you can require for samples. 
 
3. Can you do the design for us?
 

 Yes, we have our factory and we can make OEM order.
 
 
4. How long can I expect to get the sample?
 
Normally it takes 7-15days to produce the sample.
 
 
5. What about the lead time for mass production?

 
It depends on what kind of products you ordered. Generally, 15-25days for mass order.
 
We sincerely hope to get your inquiry of this voice coil actuator! If any questions, please feel free to contact us.  Thanks for visiting our website!O(∩_∩)O

 

Choosing a V-Belt

When choosing a v-belt, you should understand the characteristics of each type and how they affect the performance of your machine. Listed below are the characteristics of Cogged, Narrow profile, and wide v-belts. Learn about the advantages and disadvantages of each. Choose the right v-belt for your machine to maximize its performance. Learn about the different materials used to make v-belts and how they influence the performance of your machine.
belt

Narrow v-belts

While the flat belts are the most common type of v-belt, narrow v-belts are also a common option for industrial applications. These belts are similar to wedge belts in that they transmit heavier loads, but in a smaller form. Narrow v-belts are typically designated as 3V, 5V, and 8V and are denoted by their top width, multiplied by an eighth of an inch. Narrow v-belt sections conform to a wedge belt profile and are usually standardized by manufacturers. For example, section 3V corresponds to a wedge-type profile, while section 5V corresponds to SPB.
Both narrow and conventional v-belts are made of rubber stocks, which are generally composed of polymer or synthetic rubber. Fabric materials may be used to cover the stock material, adding a layer of reinforcement and protection. Narrow v-belts have a higher power rating than traditional V-belts. This is due to their greater depth-to-width ratio, which puts more of the reinforcing cord beneath the sheave.
The Wedge TLP ™ Narrow V-belt from Continental features a homogeneous one-piece design for maximum strength and long-term performance. These belts feature a high-denier cord and can handle significant horsepower increases. These belts are ideal for industrial applications. However, they are not as durable as their wider counterparts. The Wedge TLP is also an excellent choice for heavy-duty industrial applications.

Cogged v-belts

A key benefit of cogged v-belts is their ability to increase power output without sacrificing reliability. These belts are designed with precision-engineered cogs, which allow them to fit into smaller pulleys without reducing power output. Their raw-edge sidewalls and specially formulated EPDM rubber compound also help provide grip power. Cogged v-belts are manufactured by Carlisle(r) and offer several advantages over conventional belts.
The performance benefits of Cogged V-Belts are widely acknowledged. The company uses added-strength EPDM compounds in their belts to help reduce downtime and energy consumption. They are ideal for demanding applications such as power transmission. These belts are available in a variety of sizes and cross-sections. The section number of Cogged v-belts is H3V, H4V, and H5V.
The main difference between cogged v-belts and wedge belts is in the contact angle. While wedge and cogged v-belts have the same contact angle, the design and construction differs. Cogged v-belts typically include top and bottom layers of rubber, dampening rubber, tension cords, and top and bottom metal rings. Polychloroprene and polyester cords are common materials for the top and bottom layers, while aramid fibers are used for punishing applications.
Cogged v-belts are more flexible than traditional v-belts. Because of the slots on the belt surface, they reduce bending resistance. They are compatible with the same pulleys as standard v-belts, and run cooler and longer. They are also more efficient than standard V-belts. If you are considering a cogged V-belt for your application, it may be worth it to investigate the benefits of this belt type.
belt

Wide v-belts

Variable-speed v-belts are wider in cross section than classical v-belts. The design of variable-speed v-belts varies depending on the manufacturer, but generally features a parallel top and bottom surface. This type of v-belt wedges tightly into its pulley’s grooves, reducing power loss and slippage. This type of v-belt is best suited to applications where speed changes frequently.
High-performance Wide V-belts feature a fibre-reinforced EPDM rubber base. The resulting supercharged EPDM mix is better suited for applications where the belts are subject to higher temperatures. This type of drive belt can also replace existing drives with ease and efficiency. CZPT offers a wide range of drive belts for all applications. For applications where slack is an issue, wrapped V-belts are a smart choice.
Narrow-V-belts, on the other hand, have a more favorable height-to-width ratio. This means that a narrow-V belt can be smaller while still providing the same power transmission. These belts also have a lower mass, which reduces centrifugal forces and enables higher speeds. However, narrow-V-belts are prone to wear, but are still a popular choice in many applications.
In addition to being more durable, wrapped-V-belts have fabric-coated edges for better heat resistance. The material covering wrapped-V-belts also protects them from damage from friction and external contaminants. Unlike their rigid counterparts, these wide-V-belts have an improved lifespan and require less maintenance and downtime. These are excellent alternatives to conventional v-belts. So, what are the benefits of Wide-V-belts?

Narrow profile v-belts

When it comes to choosing the best V-belt for your needs, it is important to understand the differences between narrow profile and classical. Narrow profile V-belts are generally narrower in cross-section than classical v-belts. This makes them ideal for high-speed compact drives and light-duty applications. The following section details the differences between narrow and classical v-belts.
The tensile cords, or “cords,” are embedded into the rubber compound. These cords are the main power-transmitting component of a narrow profile v-belt. The tension cords are located at the pitch diameter of the belt cross-section and increase the tensile strength. They are typically made of steel, aramid fibers, or polyester. The core is usually made of polyurethane, but other materials can be used.
When measuring the v-belt’s width, it is important to understand the various sign-codes. Some v-belts have the wrong sign-coding schema. For example, a classical profile belt should be read as Lw = 3522 mm, while a narrow profile belt should be read as La=3553mm. A narrow profile v-belt has a steeper side-wall, which increases the wedging action. Moreover, the narrow profile v-belt has higher load capacity.
Despite their name, narrow profile v-belts are the most widely used and versatile type of v-belts. They are also the easiest to install. Their general size is similar to that of a wedge, and their number is derived from their numerical prefix. A narrow profile v-belt with a 3L300 part number is 3/8″ wide and 300.0 inches long.

Wide profile v-belts

Wide profile v-belts are designed for heavy-duty applications where extreme performance is required. They are ideal for such applications due to their high-flexural strength and shock-resistance. They also come with many benefits, including good noise-reduction, increased sturdiness, and easy maintenance. This article explores the features of wide profile v-belts and how they can benefit your business.
Classical v-belts have an internal dimensional metric marking called the “CZPT.” This identifies each specific belt. Generally, this number is a combination of the normal profile size designation letter and the internal length in inches. The inside length of the v-belt is indicated on the index of the v-belt. To begin installing the v-belt, mark the floor where it will be hung. Tape the end stop marker to the first stick.
Narrow v-belts are narrower than standard wide v-belts. They are also available in raw-edge cogged profiles and are intended for light-duty applications. Narrow V-belts are also available in 4 sizes. Compared to standard wide profile v-belts, narrow v-belts are most appropriate for high-speed, compact drives. However, wide profile v-belts are generally longer than narrow V-belts.
A v-belt is composed of different types of rubber and reinforcements. It undergoes tensile and compressive stresses on both sides. The top side of a v-belt experiences longitudinal tensile force, while the bottom side is subjected to compression against a pulley. Moreover, the included angle of a v-belt section is 40 deg. Various types of v-belts are available according to their cross-sections and performance specifications.
belt

Standard v-belts

If you are installing v-belts, you must know the right way to measure them. Many v-belts are mislabelled as classic or SPA. If you are unsure of which 1 to choose, you can refer to the standard v-belts index. The basic way to measure v-belts is by using a measuring tape or a cable tie. Using the right technique will ensure you get the right length.
A well-engineered V-belt is made from an elastomer core, which is a material that is resistant to abrasion. The elastomer core is usually composed of polyurethane, which has excellent flexural strength and shock resistance. In addition to the elastomer core, a fabric cover protects the core from wear and environmental forces. Its fabric cover is treated to form a chemical bond with the belt core, which increases the fabric’s resistance to constant bending.
The cross-section of a standard V-belt is commonly described as a trapezium, with its top and bottom sides parallel. Knowing the cross-section of a standard V-belt is essential in matching it with a pulley. It is also important to know how the v-belt is positioned on a pulley and how to select the right belt for the job.

China OEM China Manufacture Hot Selling Textile Spare Part Coil Winding Machine Ceramic CZPT Roller     with Great qualityChina OEM China Manufacture Hot Selling Textile Spare Part Coil Winding Machine Ceramic CZPT Roller     with Great quality

China Custom High Performance Eco Friendly Factory Textile Coil Winding Machine Ceramic Wire CZPT Roller near me supplier

Product Description

High Performance Eco Friendly Factory Textile Coil Winding Machine Ceramic Wire Xihu (West Lake) Dis. Roller
 

Product Description:

1. In the wire and cable industry, ceramics has become the material of choice and convenience. Almost all facets of wire and cable manufacture have benefited by the use of ceramics in the production processes.

2. Product quality and output have been maximized with minimum downtime; Lower wear
Problems and surface defects.

3. Pulley flanges, CNC Machined and available in fully anodized Aluminum, coated with anti corrosion layers, are not affected by most wire drawing solutions and do not need frequent maintenance vis-à -vis Phenolic materials. The flanges are held together by means of SS screws. High performance bearings are used and are pressed fitted into the metal flanges. The metal part is duly anodized to prevent rusting.

Product Feature:

1. Flanged ceramic roller, Wire CZPT pulleys (ceramic pulleys) is commonly used component when wire passing is required, it can be used in coil winding machine, cable machine and the textile machinery as well. The porcelain ring is mounted on the bearing, Coil winding wire CZPT pulley(wire roller) will rotate by the thread and wire passing on the surface of the ring. Thus the sliding friction has been converted to the static friction.

2. But at the start and stop, in order to overcome the inertia, there will be a partial sliding friction. The surface Polish degree of the porcelain ring reaches Ra0.2; The beating during rotation is under 0.15. We select the 99% AL2O3 as the material with the hardness of HRA88 and the density of 3.85…Two nylon side walls have been put to the both side of the ceramic ring and the bearing, coil winding wire CZPT pulley (wire roller) combines 1 wire roller.

Service:

1. With many available designs and configurations, such as bolt together, solid ceramic, or coated aluminum. CZPT can satisfy the unique requirements of the wire and cable industry.

2. HARTAI’s AL95 CZPT pulleys are long lasting, will help improve wire surface quality and at the same time reduce maintenance and production costs.

3. CZPT offers dozens standard sizes of CZPT pulleys. A large inventory of pulleys is maintained for the most widely used sizes for immediate delivery. Xihu (West Lake) Dis. pulleys can also be manufactured to specific requirements and detail.

Features :

1.The middle ceramic coil is made of precise ceramic and matched with high-speed bearing 2. The winding tension can be maintained in a stable manner through the pulleys .

3.Baffles in both sides can prevent the wire to jump out of the groove .

4.The groove is polished to Ra0.2 .

Advantages :

1.Easy to be installed
2.Low coefficient of frictio
3. High speed running bearing
4.High quality and competitive prices

Specifications of ceramic wire CZPT small pulley

Modle No. A(mm) B(mm) C(mm) D(mm)
HT001 7.8 6 2 3.2
HT002 8 8 2 4
HT003 10.6 7.3 2 3.5
HT004 12 10 4 4
HT005 14 10 3 6
HT005-C04 21.5 14 4 10
HT005-C05 21.5 14 5 10
HT006-C05 30 24 5 11
HT006-C06 30 24 6 11
HT006-C07 30 24 7 11
HT006-C08 30 24 8 11
HT007-C05 35 24 5 11
HT007-C06 35 24 6 11
HT007-C07 35 24 7 11
HT007-C08 35 24 8 11
HT008-C05 40 24 5 12
HT008-C06 40 24 6 12
HT008-C07 40 24 7 12
HT008-C08 40 24 8 12
HT009-C09 45 36 9 13.5
HT009-C10 45 36 10 13.5

Display of the ceramic wire CZPT small pulley

 

Information of our company

HARTAI Technology Industry Co., Ltd , found in 2001, is located in the beautiful city of China’s manufacturing industry HangZhou City.  It is committed to nozzle, ruby products, tungsten carbide products, ceramic products, plastic crochet hook and precision machinery manufacturing .Our main products are nozzle, ceramic roller, jump wire preventer, various sizes of ceramic eyes, combination  wire roller, ceramic wheel and non-standard parts, all kinds of tension and so on. 

FAQ

1. How can I get a quotation?
 
You can find our contact information below this page and some detail information will be very helpful to get an exact quotation. We will give quotation within 24hours, if urgent, please tell us and we will regard your inquiry priority.
 
2. How can I get a sample?
 
As the price confirmed, you can require for samples. 
 
3. Can you do the design for us?
 
 Yes, we have our factory and we can make OEM order.
 
 
4. How long can I expect to get the sample?
 
Normally it takes 7-15days to produce the sample.
 
 
5. What about the lead time for mass production?
 
It depends on what kind of products you ordered. Generally, 15-25days for mass order.
 
We sincerely hope to get your inquiry of this voice coil actuator! If any questions, please feel free to contact us. Thanks for visiting our website!O(∩_∩)O

 

What Is a V-Belt?

What is a v-belt? It is a rubber belt that is trapezium-shaped and has an elastomer core that holds the parts together. Its elastomer core is generally made of polyurethane and has good shock resistance and flexural strength. V-belts sometimes have 2 sections, 1 of which is a compression rubber and the other cushion rubber. They can be narrow or wide, depending on their use.
belt

Classical V-belts replace leather belts

Classical V-belts are a popular choice among truck drivers because they are more durable. They are typically made of polymer or rubber, with fibers from other materials added for reinforcement. These belts are a good replacement for leather belts and offer many benefits. They are durable, offer excellent temperature and oil resistance, and are easy to use. If you’re considering replacing your current belt, consider buying a replacement belt made of the same material.
Most classical V-belts are used individually and come in A and B sizes. They are rarely used in single-belt drives. Buying several A or B belts instead of 1 C belt can save money. The narrow V-belts also provide higher power ratings. This is due to their narrow profile, which places more of the reinforcing cord under the sheave. Narrow V-belts are ideal for heavy duty applications.
When you’re replacing an existing V-belt, you’ll need to measure its top width and circumference. Once you’ve determined these parameters, you’ll be able to select the right replacement belt. Make sure to take measurements of the belt’s dimensions and top width before ordering. Using these measurements will help you determine the best size for your new belt. You’ll be able to tell whether you need a larger or smaller belt after measuring the top width and circumference.
If you’re looking to replace your leather belt with a belt made of synthetic material, a Classical V-belt may be the right choice. Classical V-belts are available in many materials and are more durable than leather. And because they are so versatile, they are the perfect replacement for your current belts. You’ll be glad you did. So, don’t be afraid to experiment with this type of belt. They’ll work well in any setting, including heavy equipment.
When buying a Classical V-belt, be sure to check the dimensions and type of belt you choose. These are available in notched or cogged designs. Notches are a great way to reduce bending stress. Notches also help dissipate heat from the belt, a major factor in premature belt failure. Notched V-belts are designed to balance a combination of flexibility and tensile cord support. They are spaced properly to minimize cracking and undercord damage.
Unlike leather belts, Classical V-belts are made of synthetic materials. They are easy to install, have a wide range of sizes, and come in light to heavy-duty varieties. The V-belt’s trapezoidal shape helps it track in the grooves of pulleys and prevents it from slipping while in use. It also helps in reducing power loss, since it’s easier to grip the pulleys than leather.
belt

Narrow v-belts are more efficient

There are 5 basic types of V-belts. Their differences in cross-sectional size and power transmission make them superior to multiple single v-belts. The diagram below shows these types and how each differs from 1 another. The included angle of each belt is 40 degrees. The lower number indicates the more efficient version. Narrow V-belts are generally less expensive. Narrow v-belts are generally more efficient than wider belts.
There are several factors that influence a V-belt’s efficiency. Although the efficiency is high when a new belt is installed, the efficiency can drop to the low nineties. However, these belts are relatively resilient, and even with lower efficiency can function properly. Even if the efficiency of a V-belt is lower than it could be, it will still function. In fact, the higher the efficiency, the more energy it will save.
The first is the type of pulley. A narrow V-belt is more flexible than its wider counterpart. The belt pitch diameter is 32deg or 38deg. In addition, the belt can be cogged for added flexibility. In this way, the belt will not touch the bottom of the groove, but will only contact the inclined flanks. Without this wedge effect, the belt’s total friction force is higher. This means that it can transfer higher forces.
While a V-belt looks like a glorified rubber band, it has undergone tremendous technological development since it was first used in 1917. Synthetic rubber compounds and other cover materials have replaced rubber in the belt. New construction methods, tensile cord improvements, and cross-section profiles have resulted in a confusing variety of V-belts. Their differences, however, are based on the type of application for which they’re used.
Another type of V-belt is the raw edge variety. This type of belt is commonly used in manufacturing facilities. This type of belt requires less energy to operate. The raw edge also resists hardening. This is important since unmatched flexibility results in a smooth belt. Also, notched V-belts reduce vibration by 80%. Further, angular misalignment increases the risk of premature failure of a V-belt.
These belts differ in their overall design. While conventional V-belts are more common, narrow V-belts are more efficient and versatile. They are made of different types of rubber and reinforcements, which combine to create a trapezium-shaped cross-section. They can handle fractional loads and even 500 horsepower. Furthermore, their durability is largely dependent on their ability to withstand poor operating conditions.
Double-sided v-belts have unique features. These belts are used in applications with multiple pulleys. They can be operated clockwise or counter-clockwise. They can also be used to drive around multiple reverse bends. Further, they are more efficient and quieter than their counterparts. Finally, double-sided v-belts have 2 compression cores. The tension cord runs through both sections.
belt

Double cogged v-belts increase lateral rigidity to reduce belt whip

A double cogged v-belt is a hybrid of a traditional double versus a cogged vee-belt. These belts are useful for applications that require a large amount of flexibility without compromising durability. The double cogged design also allows the belt to follow a serpentine path. The varying dimensions of a double cogged v-belt depend on manufacturer standards.
A v-belt is measured by defining the centerline, the inside length of the v-belt, and the pitch line, which is the distance between the top and bottom sides of the trapezium. The width and height of a v-belt are defined by its cross-section. Each cross-section is given a different designation, including the width and height.
A standard V-belt is a v-belt with a fabric cover. It provides firmness in a smaller space and is less prone to belt whip when used in heavy-duty applications. Its slim profile and light gauge tensile cord make it suitable for many industrial applications. The standard length of a double cogged v-belt varies from 530 to 3,000 mm.
Single cogged v-belts are commonly used in manufacturing machines that operate in close proximity to 1 another. Single cogged v-belts increase lateral rigidity and reduce belt whip. They are also ideal for heavy-duty applications, such as in mining or quarrying. Double cogged v-belts also increase lateral rigidity to minimize belt whip.
The elastomer core of a v-belt is surrounded by tension cords. These tension cords are embedded into the rubber compound, creating a composite structure that provides a high degree of shock resistance and flexural strength. The tension cords are often made of steel, polyester, or aramid fibers. This material makes it much stronger and more durable.
A double cogged v-belt is a highly rigid option for applications where lateral rigidity is an important concern. The double cogged design also increases lateral rigidity to reduce belt whip and enhances power transmission efficiency. Double cogged v-belts also offer positive slip-proof engagement. These belts are also easier to maintain, require less maintenance, and require no lubrication.

China Custom High Performance Eco Friendly Factory Textile Coil Winding Machine Ceramic Wire CZPT Roller     near me supplier China Custom High Performance Eco Friendly Factory Textile Coil Winding Machine Ceramic Wire CZPT Roller     near me supplier