China manufacturer CZPT Conveyor Side Roller, CZPT Roller, Conveyor CZPT Roller wholesaler

Product Description

SPD Conveyor Side Roller,Xihu (West Lake) Dis. Roller,Conveyor CZPT Roller Discripton :

Australia Standard  SPD-WD750mm-35D-102*220mm*LYC6204

Our roller range: 

Carrying roller, return roller, impact roller, vertical roller, self-alignment roller, side roller, through roller, roller group etc.

SPD Conveyor Roller Construction or according to your requirements:


 

SPD Products details: 

SPD Conveyor Roller Components Details:

 SPD Wood Chips Belt Conveyor Projects Installation on the sites

SPD Conveyor Side Roller,Xihu (West Lake) Dis. Roller,Conveyor CZPT Roller details:

1. Brand: SPD
2, Lift time: 30000-50000hours
3, Production capacity: as usual 600pieces/day.
4. Roller Diameter: 76-219mm.
5. Roller Length: 190mm to 3500mm.
6. Roller tube: Q235 carbon steel,high-precision ERW, welded with                 DIN2394 Standard.
7. Shaft: Q235 Carbon steel in accordance with DIN17100 and other               equivalent standard, ISO h6 precision.
8. Bearing: Deep groove ball bearing with C3 clearance. 
9. Bearing brand: SKF,FAG,NSK, CZPT etc, or design according to your                   requirements.
10. Seals: Grease retaining inner seal with multi-stage labyrinth and                  retention cap with outboard rubbing flinger seal.
11. Color: according to your requirement.
12. Finish:  Ordinary painting/Rubber/Steel screw/Galvanized.
13. Welding: Mixed gas shielded arc welding end .
14. Professional designing and inspection team.
15. Standard: ISO/Australia/CEMA/JIS.
16.Package: Export standard plywood cases withwaterproofing                          film.                                                 

Standard Diameter Length scope ( mm) Bearings Type
(Min~Max)
Idler’s Shell Wall Thickness
mm Inch
63.5 2 1/2 150~3500 204 3.0mm~3.75mm
76 3 150~3500 204 205 3.0mm~4.0mm
89 3 1/3 150~3500 204 205 3.0mm~4.0mm
102 4 150~3500 3.5mm~4.0mm
108 4 1/4 150~3500 3.5mm~4.0mm
114 4 1/2 150~3500 3.5mm~4.5mm
127 5 150~3500 3.5mm~4.5mm
133 5 1/4 150~3500 306 3.5mm~4.5mm
140 5 1/2 150~3500 306 3.5mm~4.5mm
152 6 150~3500 4.0mm~4.5mm
159 6 1/4 150~3500 4.0mm~4.5mm
165 6 1/2 150~3500 308 4.5mm~6.0mm
177.8 7 150~3500 309 4.5mm~6.0mm
190.7 7 1/2 150~3500 309 4.5mm~6.0mm
194 7 5/8 150~3500 310 4.5mm~6.0mm
219 8 5/8 150~3500 4.5mm~6.0mm

Main Features of  SPD Steel Roller for Belt Conveyor 

  • The bearing housing and steel tube are assembled  and welded  with a concentric automatic, welding machine.
  •  Cuting of the steel tube and bearing is performed     with the use of a digital aute device/machine/equipment.
  •  Fabrication of the roller is effected by an auto device and 100% tested for its concentricity.
  •  Roller and supporting components/materials are   manufactured to ISO/BS/JIS/DIN//CEMA/Australia etc. standard. 

HangZhou Port Machine Main Facilities & Capabilities 

 

Packing and Shipping

                                              
Customer Visit from Different Countries

About HangZhou Port Machine Engineering Co., Ltd.

SPD famous Conveyor Roller brand, 301 – 500 workers25000 m³non-dust workshop,Registered capital: RMB 69,000,000,20years experience, 35 Engineers and technicians , 28 Professional designers, 7 Senior engineers,18 engineers, 2 hours to HangZhou port.

Samples are acceptable. Rush order and large quantity are acceptable. 

RZPMC is a comprehensive enterprise which engages in design, manufacture, installation and maintenance of the bulk-handling equipments. It is the wholly-owned subsidiary of the listed governmental company HangZhou port Co., Ltd. 
The main products are belt conveyor, stacker-reclaimer machine, car loader machine, un-loader machine, etc. We begin to make belt conveyor from the year 1993, and has lots of large contracts of manufactures and installation projects widely used in ports, mining, food, power plants and other industries. Our steel structures and frames production capacity is 160, 000 tons/year. In the year of 2005, we rely on our own technological superiority, self-design and manufacture the storage capacity of 9000 T/H of the stocker, as a national origination
 

  stralia
Application Coal mining industry, cement, steel, harbour etc.  
Place of Origin  HangZhou City , ZheJiang Province , China
Material Feature Water, Wear, Dust resistance 
Supply capacity  600pcs/day
Management system  ISO 9001:2008,ISO 14001:2004,GB/T 28001-2001

What Is a V-Belt?

A v-belt is a type of belt that provides a continuous motion to the vehicle’s wheels. This type of belt is made of several different components. They usually have a trapezium-shaped cross-section because of its elastomer core. Elastomers are often made of polyurethane or a synthetic rubber with good shock resistance. Sometimes, a v-belt will have 2 sections – cushion rubber and compression rubber.
belt

Link-type V-belt

A laminated link-type V-belt is 1 embodiment of the present invention. The belt comprises individual lamina sections connected longitudinally by studs and tubes, each of which has at least 1 connecting means. The slots in the links allow for a full share of the load to be transferred through the belt, and they also reduce substantially all internal mechanical stresses. The belt is preferably designed to extend substantially the entire width of the machine being driven.
Conventional link-type V-belts are installed between 2 pulleys on the tight side of the V-drive. A wide end of a link moves in the direction of rotation, while the stud of a second, smaller link pulls the nose end of the third link forward. The shank of the stud pivots on a solid fabric located in hole 2 of the third link below. The bottom link, however, curls over the stud and the belt is assembled.
The present invention offers an improved method of forming a link-type V-belt. The belt is manufactured using links and does not have to be fitted as tightly as conventional link-type V-belts. This belt is flexible and strong enough to handle normal tension loads in a well-designed drive. In addition, the belts made using the present invention will have a longer life, thereby extending the drive’s load-carrying capacity.

Classical V-belt

A classical trapezoidal belt profile makes the VB Classical V-belt ideal for various industrial applications. Available in small sizes from 5mm to 3mm, these belts are available with cogged or raw edges. Their highly engineered construction makes them ideal for a variety of uses. These belts are commonly used in motors, compressors, milling machines, mixers, and other mechanical devices. To determine the right belt for your application, consider the following factors.
The classic v-belt is the most common and economically-priced type of v-belt. They are manufactured using special formulated rubber reinforced with polyester cords. These belts can span from 16 inches to 400 inches in length. The classic V-belt is also very easy to replace. The belt’s outer diameter and pitch can be measured. The length is typically standardized by the Association for Rubber Product Manufacturers.
Typically, classical V-belts are used in single-belt drives. Because they don’t require lubrication or maintenance, these belts are often available in sizes A and B. However, larger belt sizes are rarely used for single-belt drives. In such cases, multiple A or B belts are an economical alternative to single-belt C. In addition, narrower-profile V-belts provide higher power ratings than conventional V-belts because of their higher depth-to-width ratio. These belts are ideal for heavy-duty applications.
belt

Narrow V-belt

The narrow v-belt is the same as a conventional v-belt, but it has a smaller top and bottom width. This makes it suitable for higher horsepower applications, and it is used in high-end sports cars. Narrow v-belts are generally characterized by a letter “v” on the top side and a length of outside dimensions of 1.6:1.
The steel wires that comprise the core of the v-belt are endless and are free of joints. This provides the strength required for torque transmission. A base rubber compound is placed around the steel wire and acts as a medium of compression and shock absorption during power transmission. A plastic layer acts as a protective cover, and provides the rubber with a degree of temperature tolerance. While choosing a narrow v-belt, it is important to keep in mind that there are some disadvantages to a narrow V-belt.
For example, a narrow V-belt is suitable for high-power applications, and may be used in a small assembly space. Its narrow profile also allows it to be space-saving in layout and allows high-speed drives without additional belts. Furthermore, it reduces operating and maintenance costs. It is ideal for applications where space is limited, and a high torque is required. The benefits of a narrow V-belt are plentiful.

Banded belt

Identifying a banded v-belt can be tricky, but there are a few signs that can indicate a possible problem. Cracked belts can be difficult to spot, but they can be an early indicator of a more serious problem. Look for cracked underside edges, worn covers, and misplaced slack. If 1 or more of these factors applies to your belt, you may want to seek a replacement.
Banded v-belts are made with an elastomer core. The main component of this belt is the elastomer, which is used for the band’s flexural strength and shock resistance. It’s sometimes separated into 2 sections, with each section connected to the other by a tension cord. This gives the belt its trapezium cross-section, which increases tensile strength.
The 2 main types of banded v-belts are wrapped or raw edge. Wrapped v-belts have a fiber-covered body while raw edge belts are uncovered. Banded v-belts are often classified by their cross-section, and include: standard v-belt, wedge v-belt, narrow versus double v-belt, cogged v-belt, and double t-belt.
Banded v-belts are popular with commercial applications. Whether you’re looking for a 2V-belt or a large 8V-belt, V-Belt Guys has what you need. We also stock a wide variety of different banded v-belts and can help you find 1 that fits your needs and budget. Take a look at our selection today!

Traditional V-belt

Although a traditional V-belt may be a glorified rubber band, modern variations reflect advances in engineering. Proper installation and maintenance are essential for trouble-free service. When you are replacing a traditional V-belt, be sure to follow these simple steps to ensure its longevity. Read on to learn more. Listed below are the features of each type of V-belt. Identify the type of belt you need by measuring its top width, circumference, and dimensions.
TEC Traditional V-belts have an exceptionally low slip rate and are resistant to high operating temperatures. These types of belts do not experience early belt aging. They are also highly resistant to poor operating conditions. However, the maintenance is more extensive than other types of belts. A typical V-belt part number is B50, which is the cross-section size of a 50-inch belt. The belt’s lifespan is greatly increased because of this feature.
A ribbed V-belt is another option. It has a deeper V than a traditional V-belt. The ribs in this type are narrower and more flexible. These ribs are smaller than the classic V-belt, but they can transmit 3 times as much horsepower. Because they are thinner, these belts are more flexible than traditional V-belts. The thickness of the ribs is less critical.
belt

Metric V-belt

Metric V-belts are made to a more precise standard than their American counterparts. These belts are manufactured to meet ARPM tolerances, making them suitable for industrial, machine, and food processing applications. This metric system is also more convenient than converting between the 2 units. Listed below are the most common uses for a Metric V-belt. If you’re in the market for a new belt, consider ordering a metric one.Metric V-belts are made to a more precise standard than their American counterparts. These belts are manufactured to meet ARPM tolerances, making them suitable for industrial, machine, and food processing applications. This metric system is also more convenient than converting between the 2 units. Listed below are the most common uses for a Metric V-belt. If you’re in the market for a new belt, consider ordering a metric one.
Metric V-belts are generally more durable than their equivalents made of standard American-sized belts. Metric V-belts are available in many different sizes to fit different machineries. In addition to offering superior load-carrying capacity, Metric Power(tm) V-belts are known for their exceptional flex and stretch characteristics. For optimum performance in textile mills, food processing, and machine tool applications, Metric Power(tm) V-belts are manufactured using a proprietary construction that combines a higher load-carrying capacity with superior flex and stretch.
Metric belts can generate 50% to 100% more horsepower than conventional and classic sectioned belts. This is achieved through improved construction and placement of the cord line. These belts also have unique wedge designs that help them support the cord in motion. However, you must ensure the proper tension when buying a Metric V-belt, because improper tension may damage the belt. They are compatible with both U.S. and international standards.

China manufacturer CZPT Conveyor Side Roller, CZPT Roller, Conveyor CZPT Roller     wholesaler China manufacturer CZPT Conveyor Side Roller, CZPT Roller, Conveyor CZPT Roller     wholesaler