China best Screen Drive Roller/Wire Return Roller/Vacuum Suction Roller/Guide Roller

Product Description

Product Description

Paper Machine Jumbo Press Roll 
 

Jumbo Press roll usually refers to a nip composed of pressing rollers which a diameter of more than 1000mm. It is often used in the production of corrugated paper, cardboard, and other paper or cardboard with large basis weight.

Compared with ordinary presses, it has a wide nip formed by the large-spoke press, the paper sheet can be pressed for a long time in the nip. It can improve the dehydration efficiency, increases the de-watering capacity and paper quantity because of the two-way vertical dehydration design. At the same time, it can also reduce steam consumption in the dryer section and further reduces production costs. The strength and burst resistance of the paper also been improved.

Normally, the paper machine adopts this technology has the feature of high speed, low energy consumption, and good paper quality. Therefore, jumbo pressing technology and equipment have become the first choice in the speed-up and energy-saving of old paper machines and the design of new paper machines.

Product Parameters

Jumbo Press Roll Advantage:
The jumbo press rolls forms a wide pressure zone, also it is two-way vertical dehydration. It can improved the dehydration efficiency, the paper dryness,strength,durability,reduce the steam consumption.

Application:
Mainly be used for the production of corrugated paper,cardboard 
and other large weight paper or board.
 

Diameter 1000mm~1600mm
Maximum face length 14000mm
Shell material Cast Iron
Surface Blind hole, Smooth, Groove Rubber
Coating Rubber
Bearing House Gray cast iron or nodular cast iron
Connection type Flange joint

Details for rubber rollers:  product/iwCAgpmdCucl/China-Groove-Plain-Blind-Hole-Rubber-Roller-for-Paper-Machine.html
 

Detailed Photos

Company Profile

LEIZHAN is a China Based engineering company and machinery supplier committed to offer complate solution and provide high-cost-performance equipments related to stock preparation and paper-making industry.

For years,we have insisted on taking customer’s value as our center and having strict quality-control and innovation in the whole process.  With advantage technology and excellent equipment,we provide one-stop service from consultation,process design and optimization,manufacture,installation,commissing and personnel training and so on.

At the same time,we can supply all kinds of stock preparation and paper making equipment and accessories.Besides,we can custom design according to customers’ requirements. Our products have reliable quality and superior performance and have been exported to Poland,Greece,Turkey,Iran,India,Packistan, Bangladesh, Thailand, Indonesia, Philippines, Malaysia, Vietnam, Mexico, Guatemala, Costa Rica, Columbia, Egypt etc.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Provide Accessories, Video Instruction
Warranty: 1 Year
Certification: RoHS, ISO 9001:2000, ISO 9001:2008, CE
Surface Treatment: Polishing
Manufacturing Process: Casting
Material: Stainless Steel
Customization:
Available

|

guide roller

Can you provide examples of products or machinery that commonly use guide rollers?

Guide rollers are used in various industries and applications where precise and controlled motion of materials or objects is required. Here are some examples of products or machinery that commonly use guide rollers:

  • Conveyor Systems:

Guide rollers are extensively used in conveyor systems across industries such as manufacturing, logistics, and warehousing. They are essential components in belt conveyors, roller conveyors, and gravity conveyors. Guide rollers ensure smooth and accurate movement of materials or objects along the conveyor, preventing misalignment, deviations, and material spillage. Conveyor systems in industries like automotive, food and beverage, e-commerce, and package handling rely on guide rollers for efficient material handling and transport.

  • Printing and Packaging Machinery:

In printing and packaging machinery, guide rollers play a critical role in maintaining precise alignment and tension control of materials, such as paper, film, or labels. They are used in machinery for processes like printing, laminating, slitting, cutting, and folding. Guide rollers guide the materials through various stages, ensuring accurate positioning and preventing wrinkles, creases, or misalignment. Printing presses, label applicators, paper converting machines, and packaging lines commonly incorporate guide rollers to achieve high-quality output and efficient production.

  • Textile Machinery:

Textile machinery, including weaving machines, knitting machines, and spinning machines, utilize guide rollers in their operations. Guide rollers guide the fabric or yarn through different stages of the manufacturing process, ensuring proper alignment, tension, and controlled movement. They help prevent yarn tangling, fabric distortions, or misalignment during weaving, knitting, or spinning. Guide rollers are crucial components in textile machinery, enabling efficient and precise fabric production.

  • Paper and Printing Industry:

In the paper and printing industry, guide rollers are utilized in various equipment and processes. For example, in offset printing presses, guide rollers assist in accurate paper feeding and alignment, ensuring precise registration of colors and images. In paper converting machines, guide rollers help guide the paper through cutting, folding, or gluing operations. Guide rollers also find application in bookbinding machines, where they facilitate the movement of paper signatures or book blocks through the binding process.

  • Metal and Woodworking Machinery:

Guide rollers are commonly used in metal and woodworking machinery to guide and support workpieces during cutting, shaping, or milling operations. In sawing machines, guide rollers ensure proper alignment and smooth movement of the material being cut. They also help prevent blade deflection or workpiece deviation. In woodworking routers or planers, guide rollers assist in controlling the movement of the workpiece, allowing for precise shaping or milling. Guide rollers contribute to increased accuracy and efficiency in metal and woodworking processes.

  • Automated Guided Vehicles (AGVs):

Automated Guided Vehicles (AGVs) used in material handling and logistics applications often incorporate guide rollers. Guide rollers are installed on AGVs to follow guide tracks or lines embedded in the floor or along the designated paths. They ensure accurate navigation and controlled motion of AGVs within warehouses, distribution centers, or manufacturing facilities. Guide rollers help AGVs maintain their intended paths, avoid obstacles, and achieve efficient and safe material transport.

These are just a few examples illustrating the wide range of products and machinery that commonly use guide rollers. Their versatility and ability to provide precise and controlled motion make guide rollers integral components in numerous industries, contributing to improved efficiency, productivity, and quality in various material handling and manufacturing processes.

guide roller

What are the signs that indicate a need for guide roller replacement or maintenance, and how can they be diagnosed?

Proper maintenance and timely replacement of guide rollers are crucial for the efficient and safe operation of conveyor systems. Here are some signs that indicate a need for guide roller replacement or maintenance, along with diagnostic methods:

  • Excessive Noise:

If guide rollers produce excessive noise during operation, it may indicate a problem. Unusual grinding, squeaking, or rattling noises can be signs of worn-out or damaged guide rollers. To diagnose the issue, the conveyor system should be observed and listened to during operation. If the noise persists even after cleaning or lubricating the guide rollers, it may be necessary to inspect them more closely for wear, misalignment, or other issues.

  • Uneven or Erratic Material Movement:

If materials on the conveyor system exhibit uneven or erratic movement, it could be a sign of guide roller problems. Misaligned or worn-out guide rollers may cause materials to veer off course, tilt, or become stuck. Visual observation of material movement along the conveyor path can help diagnose this issue. If materials consistently deviate from the intended path or exhibit inconsistent movement, it may be necessary to inspect the guide rollers for proper alignment, damage, or wear.

  • Excessive Vibration:

Excessive vibration in the conveyor system can indicate problems with guide rollers. Misaligned or damaged guide rollers can cause increased vibration, which can affect the overall stability and performance of the system. To diagnose this issue, the conveyor system should be observed during operation. Excessive vibration can be visually detected or felt by touching the conveyor frame or components. If excessive vibration is present, the guide rollers should be inspected for alignment issues, damage, or excessive wear.

  • Uneven Wear Patterns:

Inspecting the wear patterns on guide rollers can provide valuable information about their condition. Uneven wear patterns, such as flat spots, grooves, or excessive wear on specific areas, may indicate misalignment, improper loading, or damage to the guide rollers. Visual inspection of the guide rollers and comparing the wear patterns across multiple rollers can help diagnose this issue. If significant uneven wear is observed, it may be necessary to replace the affected guide rollers and investigate the underlying causes.

  • Physical Damage:

Physical damage to guide rollers, such as cracks, breaks, or deformations, is a clear indication that maintenance or replacement is needed. Visual inspection of the guide rollers should be conducted regularly to identify any visible signs of damage. If damaged guide rollers are detected, they should be replaced promptly to prevent further deterioration and potential system failures.

  • Increased Friction or Resistance:

If there is a noticeable increase in friction or resistance during the movement of the conveyor system, it may indicate problems with the guide rollers. Excessive friction can lead to increased power consumption, reduced efficiency, and accelerated wear of other components. To diagnose this issue, the conveyor system should be observed for any signs of dragging, sticking, or increased effort required for material movement. If increased friction or resistance is present, the guide rollers should be inspected for proper lubrication, cleanliness, or signs of damage.

In summary, several signs indicate a need for guide roller replacement or maintenance, including excessive noise, uneven or erratic material movement, excessive vibration, uneven wear patterns, physical damage, and increased friction or resistance. These signs can be diagnosed through visual observation, listening to the conveyor system during operation, inspecting wear patterns, checking for physical damage, and monitoring the overall performance and behavior of the system. Regular inspection and proactive maintenance of guide rollers are essential to ensure optimal conveyor system performance and prevent potential safety hazards.

guide roller

Can you explain the primary functions and role of a guide roller in machinery?

A guide roller plays crucial functions and holds a significant role in machinery. Here’s a detailed explanation of the primary functions and role of a guide roller:

  • Guidance and Alignment:

One of the primary functions of a guide roller is to provide guidance and alignment for moving components within machinery. It ensures that objects or materials follow a predetermined path or track, preventing them from deviating or straying off course. The guide roller’s smooth or grooved surface, along with its rotational movement, helps maintain proper alignment and prevents misalignment or unwanted movements. By guiding the motion of objects, the guide roller ensures accurate positioning and efficient operation of the machinery.

  • Support and Load Distribution:

A guide roller serves as a support mechanism, carrying the weight of objects or loads within the machinery. It helps distribute the load evenly, preventing excessive stress or strain on specific components. By providing support and load distribution, the guide roller enhances the stability and overall performance of the machinery. It reduces the risk of component failures, improves operational efficiency, and extends the lifespan of the machinery.

  • Friction Reduction:

Guide rollers also play a role in reducing friction within machinery. As objects move along the guide roller’s surface, the roller’s design minimizes contact friction between the object and the machinery’s components. This friction reduction helps to conserve energy and prevent excessive wear and tear on both the objects being transported and the machinery itself. By reducing friction, guide rollers contribute to smoother operation, lower maintenance requirements, and improved overall efficiency.

  • Prevention of Damage and Misalignment:

The presence of guide rollers helps prevent damage and misalignment of objects or materials within machinery. By providing a designated path or track, guide rollers ensure that moving components stay in the intended position and avoid colliding with other parts of the machinery. This prevents potential damage to the objects being transported and the machinery itself. Additionally, guide rollers help prevent misalignment, which could lead to operational issues, decreased performance, and increased risk of accidents or mechanical failures.

  • Noise and Vibration Reduction:

Guide rollers contribute to noise reduction and vibration damping within machinery. The rotational movement of the guide roller absorbs and dissipates vibrations generated during operation, minimizing the transmission of vibrations to other parts of the machinery. This reduction in vibration helps to maintain a quieter working environment, reduces the risk of noise-related health issues for operators, and improves overall user comfort.

In summary, the primary functions and role of a guide roller in machinery include providing guidance and alignment for moving components, offering support and load distribution, reducing friction, preventing damage and misalignment, and contributing to noise and vibration reduction. By fulfilling these functions, guide rollers enhance the overall performance, reliability, and longevity of machinery in various industrial applications.

China best Screen Drive Roller/Wire Return Roller/Vacuum Suction Roller/Guide Roller  China best Screen Drive Roller/Wire Return Roller/Vacuum Suction Roller/Guide Roller
editor by CX 2024-03-25